vurorange.blogg.se - Mastercam lathe programming

The tool centerline programing (G40) and cutter diameter compensation (G41/G42) are available with G112. The G112 code allows 3-D contouring using the X, Y, and Z axes. The G112 code is intended to be used with a Lathe using the C-axis and Live Tooling to program cutter anywhere along a non-rotating part. Refer to Chapter 16 for more information on modal G-codes. Cuts that must cross spindle center can be accomplished with two parallel passes on either side of spindle center.Ĭartesian to Polar conversion is a modal command. If necessary re-orient the program so the cut does not go over the center of the part. Tool paths should never cross the spindle centerline. Note: Programmed moves should always position the tool centerline. This feature allows face machining programming in the Cartesian coordinate system. Normally a straight line would require many points to define the path, however, in Cartesian, only end points are necessary. G112 also converts X, Y position commands into rotary C-Axis and linear X-axis moves.Ĭartesian to Polar coordinate programming greatly reduces the amount of code required to command complex moves.

While it is active, the control uses the G17 XY for G01 linear XY strokes and G02 and G03 for circular motion.

Adhere to all department and company quality standards.The G112 XY to XC coordinate interpolation feature lets you program subsequent blocks in Cartesian XY coordinates, which the control automatically converts to polar XC coordinates.

Must work with minimum supervision, but also be able to accept and follow instructions.

Must have solid modeling skills in Mastercam, to model the part and/or design work-holding tooling.

Must use the verification tools available in Mastercam to eliminate errors or omissions.

Must be capable of giving and receiving verbal and written instructions, including setup sheets.

Must select the optimum tools, select the optimum width and depth of cuts for the machining operation being programmed.

Must be able to work with drawings, solid models, written and/or verbal instructions.

Experience required: minimum 5 years in programming plus minimum 5 years in setup.

CNC Lathe manual/Mastercam programmer for 2-axis lathe, with 6-axis skills, sub spindle and live tooling is a plus.

We have immediate full-time positions for CNC Lathe Mastercam Programmer.

Join a great high-performing team with an opportunity for personal and technical growth!

Our company offers a competitive compensation package and excellent benefits. has been in business for over 30 years and is a world class leader in providing high precision machined products for Aerospace, Automotive, and Commercial Industries. L&M Machining Corporation – Placentia, CA